D-Link xStack DGS-3620 Series - Page 845

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
840
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable SNMP authentication trap support:
DGS-3620-28PC:admin#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DGS-3620-28PC:admin#
74-14 disable snmp authenticate_traps
Description
This command is used to disable SNMP authentication failure trap support.
Format
disable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable SNMP authentication trap support:
DGS-3620-28PC:admin#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DGS-3620-28PC:admin#
74-15 enable snmp linkchange_traps
Description
This command is used to enable SNMP linkchange trap support.
Format
enable snmp linkchange_traps