D-Link xStack DGS-3620 Series - Page 846

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
841
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command..
Example
To enable SNMP linkchange trap support:
DGS-3620-28PC:admin#enable snmp linkchange_traps
Command: enable snmp linkchange_traps
Success.
DGS-3620-28PC:admin#
74-16 disable snmp linkchange_traps
Description
This command is used to disable SNMP linkchange trap support.
Format
disable snmp linkchange_traps
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable SNMP linkchange trap support:
DGS-3620-28PC:admin#disable snmp linkchange_traps
Command: disable snmp linkchange_traps
Success.
DGS-3620-28PC:admin#