D-Link xStack DGS-3620 Series - Enable Authorization Attributes; Disable Authorization Attributes

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
294
DGS-3620-28PC:admin#show authentication ports 1-3
Command: show authentication ports 1-3
Port Methods Auth Mode Authentication VLAN(s)
---- -------------- ----------- ----------------------
1 None Host-based
2 None Host-based
3 None Host-based
DGS-3620-28PC:admin#
19-10 enable authorization attributes
Description
This command is used to enable the authorization global state.
Format
enable authorization attributes
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the authorization global state:
DGS-3620-28PC:admin#enable authorization attributes
Command: enable authorization attributes
Success.
DGS-3620-28PC:admin#
19-11 disable authorization attributes
Description
This command is used to disable the authorization global state.
Format
disable authorization attributes