xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
758
Chapter 65
MAC-based Access
Control Commands
enable mac_based_access_control
disable mac_based_access_control
config mac_based_access_control password <passwd 16>
config mac_based_access_control method [local | radius]
config mac_based_access_control guest_vlan ports <portlist>
config mac_based_access_control ports [<portlist> | all] {state [enable | disable] | aging_time
[infinite | <min 1-1440>] | block_time <sec 0-300> | max_users [<value 1-4000> | no_limit]}(1)
create mac_based_access_control [guest_vlan <vlan_name 32> | guest_vlanid <vlanid 1-
4094>]
delete mac_based_access_control [guest_vlan <vlan_name 32> | guest_vlanid < vlanid 1-
4094>]
clear mac_based_access_control auth_state [ports [all | <portlist>] | mac_addr <macaddr>]
create mac_based_access_control_local mac <macaddr> {[vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}
config mac_based_access_control_local mac <macaddr> [vlan <vlan_name 32> | vlanid
<vlanid 1-4094> | clear_vlan]
config mac_based_access_control max_users [<value 1-4000> | no_limit]
config mac_based_access_control authorization attributes {radius [enable | disable] | local
[enable | disable]}(1)
delete mac_based_access_control_local [mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]
show mac_based_access_control auth_state ports {<portlist>}
show mac_based_access_control {ports {<portlist>}}
show mac_based_access_control_local {[mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}
config mac_based_access_control log state [enable | disable]
config mac_based_access_control trap state [enable | disable]
config mac_based_access_control password_type [manual_string | client_mac_address]
65-1 enable mac_based_access_control
Description
This command is used to enable the MAC-based access control function.
Format
enable mac_based_access_control
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
To Next Page
Loading...
