D-Link xStack DGS-3620 Series - Page 764

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
759
Example
To enable MAC-based access control:
DGS-3620-28PC:admin#enable mac_based_access_control
Command: enable mac_based_access_control
Success.
DGS-3620-28PC:admin#
65-2 disable mac_based_access_control
Description
This command is used to disable the MAC-based access control function.
Format
disable mac_based_access_control
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable MAC-based access control:
DGS-3620-28PC:admin#disable mac_based_access_control
Command: disable mac_based_access_control
Success.
DGS-3620-28PC:admin#
65-3 config mac_based_access_control password
Description
This command is used to set the password that will be used for authentication via RADIUS server.
Format
config mac_based_access_control password <passwd 16>
Parameters
<passwd 16> - In RADIUS mode, the switch communicates with the RADIUS server using this