D-Link xStack DGS-3620 Series - Show Environment

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
16
OSPF : Enabled
VLAN Trunk : Disabled
Telnet : Enabled (TCP 23)
Web : Enabled (TCP 80)
SNMP : Disabled
SSL Status : Disabled
SSH Status : Disabled
802.1X : Disabled
Jumbo Frame : Off
CLI Paging : Enabled
MAC Notification : Disabled
Port Mirror : Enabled
SNTP : Disabled
DHCP Relay : Disabled
DNSR Status : Disabled
VRRP : Disabled
HOL Prevention State : Enabled
Syslog Global State : Disabled
Single IP Management : Disabled
Password Encryption Status : Disabled
DNS Resolver : Disabled
DGS-3620-28PC:admin#
2-9 show environment
Description
This command is used to display the device’s internal and external power, internal temperature,
and fan status.
Format
show environment
Parameters
None.
Restrictions
None.
Example
To display the switch hardware and fan status: