xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
780
Restrictions
Only Administrators and Operators can issue this command.
Example
To delete mirror group 3:
DGS-3620-28PC:admin# delete mirror group_id 3
Command: delete mirror group_id 3
Success.
67-5 enable mirror
Description
This command, combined with the disable mirror command below, allows you to enable or disable
mirror function without having to modify the mirror session configuration.
Note: If the target port hasn’t been set, enable mirror will not take effect.
Format
enable mirror
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable mirroring configurations:
DGS-3620-28PC:admin#enable mirror
Command: enable mirror
Success.
To Next Page
Loading...
