D-Link xStack DGS-3620 Series - Show Command Logging

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
272
Format
disable command logging
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the command logging:
DGS-3620-28PC:admin# disable command logging
Command: disable command logging
Success.
DGS-3620-28PC:admin#
17-3 show command logging
Description
This command displays the switch’s general command logging configuration status.
Format
show command logging
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To show the command logging configuration status:
DGS-3620-28PC:admin# show command logging
Command: show command logging
Command Logging State : Disabled
DGS-3620-28PC:admin#