D-Link xStack DGS-3620 Series - Disable Autoconfig

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
159
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable DHCP auto configuration status:
DGS-3620-28PC:admin#enable autoconfig
Command: enable autoconfig
Success.
DGS-3620-28PC:admin#
10-3 disable autoconfig
Description
This command is used to disable automatically to get configuration from a TFTP server.
Format
disable autoconfig
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable the DHCP auto configuration status:
DGS-3620-28PC:admin#disable autoconfig
Command: disable autoconfig
Success.
DGS-3620-28PC:admin#