D-Link xStack DGS-3620 Series - Show Utilization Dram

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
854
13 0 0 0
14 0 0 0
15 0 0 0
16 0 0 0
17 0 0 0
18 0 0 0
19 0 0 0
20 0 0 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
75-4 show utilization cpu
Description
This command is used to display real-time CPU utilization statistics.
Format
show utilization cpu
Parameters
cpu - Specifies to display real-time port statistics.
Restrictions
None.
Example
To display CPU utilization:
DGS-3620-28PC:admin#show utilization cpu
Command: show utilization cpu
CPU Utilization
-------------------------------------------------------------------------------
Five seconds - 15 % One minute - 17 % Five minutes - 17 %
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
75-5 show utilization dram
Description
This command is used to display real-time DRAM utilization statistics.
Format
show utilization dram {unit <unit_id>}