D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
760
password. The maximum length of the key is 16 characters.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the password “rosebud” that will be used for authentication via RADIUS server:
DGS-3620-28PC:admin#config mac_based_access_control password rosebud
Command: config mac_based_access_control password rosebud
Success.
DGS-3620-28PC:admin#
65-4 config mac_based_access_control method
Description
This command is used to authenticate via a local database or a RADIUS server.
Format
config mac_based_access_control method [local | radius]
Parameters
local - Specifies to authenticate via local database.
radius - Specifies to authenticate via RADIUS server.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the MAC-based access control method as local:
DGS-3620-28PC:admin#config mac_based_access_control method local
Command: config mac_based_access_control method local
Success.
DGS-3620-28PC:admin#
65-5 config mac_based_access_control guest_vlan ports
Description
This command is used to put the specified port in guest VLAN mode. For those ports not contained
in the port list, they are in non-guest VLAN mode.For detailed information about the operation of

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English