D-Link xStack DGS-3620 Series - Page 759

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
754
Format
disable mac_notification
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable the MAC notification function:
DGS-3620-28PC:admin#disable mac_notification
Command: disable mac_notification
Success.
DGS-3620-28PC:admin#
64-3 config mac_notification
Description
This command is used to configure the switch’s MAC address table notification global settings.
Format
config mac_notification {interval <sec 1-2147483647> | historysize <int 1-500>}(1)
Parameters
interval - Specifies the time interval in seconds to trigger the notification.
<sec 1-2147483647> - Enter between 1 second and 2147483647 seconds.
historysize - Specifies the entries of new learned MAC to trigger the notification.
<int 1-500> - Enter up to 500 entries.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the switch’s MAC address table notification global settings: