xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
359
Parameters
prefix_list - Specifies to display IPv4 prefix list debug information.
access_list - Specifies to display IPv4 access list debug information.
route_map - Specifies to display route map debug information.
ipv6_prefix_list - Specifies to display IPv6 prefix list debug information.
ipv6_access_list - Specifies to display IPv6 access list debug information.
Restrictions
Only Administrator-level users can issue this command.
Example
To display route filter information in kernel:
To Next Page
Loading...
