D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
361
If the input module list is empty, the states of all registered modules which support debug module
will be shown.
Format
debug show status {module <module_list>}
Parameters
module – (Optional) Specifies the module list.
<module_list> - Enter the module list here.
Restrictions
Only Administrator-level users can issue this command.
Example
To show the specified module’s debug state:
Prompt# debug show status module MSTP
Command: debug show status module MSTP
Debug Global State : Enable
MSTP : Enable
Prompt#
To show the debug state:
Prompt# debug show status
Command: debug show status
Debug Global State: Enable
MSTP : Disabled
IMPB : Disabled
DHCPv6_CLIENT : Disabled
DHCPv6_RELAY : Disabled
OSPFV2 : Disabled
VRRP : Disabled
RIPNG : Disabled
ERPS : Disabled
DHCPv6_SERVER : Disabled
Prompt#
20-77 debug super_vlan state
Description
This command is used to enable or disable the super VLAN Debug Function.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English