D-Link xStack DGS-3620 Series - Page 1014

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1009
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable the LED admin state:
DGS-3620-28PC:admin#config led state disable
Command: config led state disable
Success.
DGS-3620-28PC:admin#
87-7 show led
Description
This command is used to display the setting of all port’s LED admin state.
Format
show led
Parameters
None.
Restrictions
None.
Example
To display the setting of all port’s LED admin state:
DGS-3620-28PC:admin#show led
Command: show led
Port LED State: Enabled
DGS-3620-28PC:admin#