D-Link xStack DGS-3620 Series - Page 1024

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1019
Parameters
None.
Restrictions
None.
Example
To show the global PTP configuration:
DGS-3620-28PC:admin# show ptp
Command: show ptp
PTP State Setting : Enabled
PTP Mode Setting : Boundary Clock
PTP Transport Protocol Setting : UDP
PTP Clock Domain Number Setting : 0
PTP Clock Domain Name Setting : Internal Domain
DGS-3620-28PC:admin#
88-11 show ptp clock
Description
This command is used to display the active attributes of the PTP clock.
Format
show ptp clock
Parameters
None.
Restrictions
None.
Example
To show the active attributes of the boundary clock: