xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1023
DGS-3620-28PC:admin# show ptp clock parent
Command: show ptp clock parent
Box ID: 1
PTP Parent Port Identity : ACDE4823456789AB
PTP Parent Port Number : 3
PTP Grandmaster Identity : ACDE4823659789AD
PTP Grandmaster Clock Class : 13
PTP Grandmaster Clock Accuracy : 100ns
PTP Grandmaster Priority 1 : 120
PTP Grandmaster Priority 2 : 127
Box ID: 2
PTP Parent Port Identity : ACDE482345678910
PTP Parent Port Number : 5
PTP Grandmaster Identity : ACDE4823659789AD
PTP Grandmaster Clock Class : 13
PTP Grandmaster Clock Accuracy : 100ns
PTP Grandmaster Priority 1 : 120
PTP Grandmaster Priority 2 : 127
88-13 show ptp ports
Description
This command is used to display the active attributes of the special PTP ports on the switch.
Format
show ptp ports [<portlist> | all]
Parameters
ports - Specifies the list of port used for this display.
<portlist> - Enter the list of port used for this display here.
all - Specifies that all the ports will be used for this display.
Restrictions
None.
Example
To show the active attributes for special ports 1:1-1:4 of the boundary clock:
To Next Page
Loading...
Need help?
General