D-Link xStack DGS-3620 Series - Page 1068

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1063
inner_vid 10 svid 2000 cvid 20
Command: create vlan_translation ports 1 replace outer_vid 1000 inner_vid 10
svid 2000 cvid 20
Success.
DGS-3620-28PC:admin#
92-9 delete vlan_translation ports
Description
This command is used to delete translation relationships between C-VLAN and S-VLAN.
Format
delete vlan_translation ports [<portlist> | all] {outer_vid <vidlist> {inner_vid <vlanid 1-
4094>}}
Parameters
<portlist> - Enter the ports to be deleted.
all - Specifies to delete all ports.
outer_vid - The matched VLAN ID: Service provider VLAN ID on NNI port, or Customer VLAN ID
on UNI port.
<vidlist> - Enter a range of VLAN IDs.
inner_vid - The matched inner VLAN ID of the double tag.
<vlanid 1-4094> - Enter the inner VLAN ID between 1 and 4094.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a VLAN translation rule on ports 21:
DGS-3620-28PC:admin#delete vlan_translation ports 21 outer_vid 1
Command: delete vlan_translation ports 21 outer_vid 1
Success.
DGS-3620-28PC:admin#
92-10 show vlan_translation
Description
This command is used to display existing C-VLAN based VLAN translation rules.
Format
show vlan_translation {[ports <portlist> | cvid <vidlist>]}