D-Link xStack DGS-3620 Series - Page 1073

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1068
92-13 show vlan_translation_profile
Description
This command is used to show flow-based VLAN translation rules in a profile.
Format
show vlan_translation_profile {<profile_id_list>}
Parameters
<profile_id_list> - (Optional) Specifies the profile ID number to be shown. If no profile ID is used,
all profiles will be displayed.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To show all profile rules:
DGS-3620-28PC:admin#show vlan_translation_profile
Command: show vlan_translation_profile
Profile ID:2
ports:
--------------------------------------------------------
Rule ID :1
Status : ACTIVE
Active Port : 1-2
Action : Add
SP VLAN ID : 100
Priority:
Match:
Outer-VID : 10
Total Rule : 1
DGS-3620-28PC:admin#
92-14 delete vlan_translation_profile
Description
This command is used to delete a QinQ translation profile or delete a QinQ rule in a profile.
Format
delete vlan_translation_profile [<profile_id> | all] {rule_id [<rule_id_list> | all]}