D-Link xStack DGS-3620 Series - Page 1106

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1101
DGS-3620-28PC:admin#
99-4 show sftp server
Description
This command is used to show the parameters of the SFTP server.
Format
show sftp server
Parameters
None.
Restrictions
None.
Example
To show the parameters of the SFTP server.
DGS-3620-28PC:admin#show sftp server
Command: show sftp server
The SFTP Server Configuration
Protocol Version : 3
State : Enabled
Session Idle Timeout : 600 sec
DGS-3620-28PC:admin#