D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1161
Parameters
None.
Restrictions
None.
Example
To show SSH server:
DGS-3620-28PC:admin#show ssh server
Command: show ssh server
The SSH Server Configuration
Maximum Session : 8
Connection Timeout : 120
Authentication Fail Attempts : 2
Rekey Timeout : Never
TCP Port Number : 22
Bypass Login Screen State : Disabled
DGS-3620-28PC:admin#
104-11 config ssh publickey bypass_login_screen state
Description
This command is used to enable or disable bypassing login screen which is used to avoid a
secondary username/password authentication for users using SSH public key authentication.
Format
config ssh publickey bypass_login_screen state [enable | disable]
Parameters
enable - Specifies to bypass the username/password login screen to avoid a secondary
authentication after using SSH public key authentication. If this method is specified, the login
user using SSH public key authentication can execute command directly with the initial
privilege level of the login user.
disable - Specifies to need a secondary username/password authentication after using SSH
public key authentication. If this method is specified, the login user using SSH public key
authentication must pass username/password authentication before execution shell is
obtained. The initial privilege level depends on the secondary username/password
authentication.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English