D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1175
stacking is stable, master’s priority will become zero. If stacking topology change again, Master will
use priority zero and MAC address to determine who new primary master is.
Format
config stacking force_master_role state [enable | disable]
Parameters
enable - Specifies that the Switch's Stacking Force Master Role state will be enabled.
disable - Specifies that the Switch's Stacking Force Master Role state will be disabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable stacking force master role state:
DGS-3620-28PC:admin# config stacking force_master_role state enable
Command: config stacking force_master_role state enable
Success.
DGS-3620-28PC:admin#
106-3 show stacking_mode
Description
This command displays the current stacking mode.
Format
show stacking_mode
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To display stacking mode:

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English