D-Link xStack DGS-3620 Series - Page 1182

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1177
7 - NOT_EXIST No
8 - NOT_EXIST No
DGS-3620-28PC:admin#
106-5 show stack_device
Description
This command displays stack device information.
Format
show stack_device
Parameters
None.
Restrictions
None.
Example
To display the stack information:
DGS-3620-28PC:admin# show stack_device
Command: show stack_device
Box ID Box Type H/W Version Serial Number
------- --------------- ------------ ----------------
1 DGS-3620-28PC A1 D1234567890
2 DGS-3620-28PC A1 D1234567891
DGS-3620-28PC:admin#
106-6 config box_id current_box_id
Description
This command configures the box ID. By default, the box ID is automatically assigned by the
system based topology election results. Administrators can assign box IDs statically. The new box
ID will take effect after unit reboot. Each unit in the Switch stack must have a unique box IDs. If the
IDs duplicate, the stack system cannot stack normally.
Format
config box_id current_box_id <value 1-12> new_box_id [auto | <value 1-12>]