D-Link xStack DGS-3620 Series - Page 1194

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1189
DGS-3620-28PC:admin#create subnet_vlan network 172.168.1.1/24 vlan v2 priority
2
Command: create subnet_vlan network 172.168.1.1/24 vlan v2 priority 2
Success.
DGS-3620-28PC:admin#
To create an IPv6 subnet VLAN entry:
DGS-3620-28PC:admin# create subnet_vlan ipv6network fe80:250:baff::0/64 vlan v2
priority 2
Command: create subnet_vlan ipv6network fe80:250:baff::0/64 vlan v2 priority 2
Success.
DGS-3620-28PC:admin#
109-2 delete subnet_vlan
Description
This command is used to delete a subnet VLAN from the switch. Users can delete a subnet VLAN
entry by IP subnet or VLAN, or delete all subnet VLAN entries.
Format
delete subnet_vlan [network <network_address> | ipv6network <ipv6networkaddr> | vlan
<vlan_name 32> | vlanid <vidlist> | all]
Parameters
network - Specifies an IPv4 network address.
<network_address> - Enter an IPv4 network address. The format is ipaddress/prefix length.
ipv6network - Specifies an IPv6 network address.
<ipv6networkaddr> - Enter an IPv6 network address. The format is ipaddress/prefix length.
vlan - Specifies to delete all subnet VLAN entries associated with this VLAN.
<vlan_name 32> - Enter a VLAN name. The maximum length is 32 characters.
vlanid - Specifies a list of VLANs by VLAN ID.
<vidlist> - Enter the VLAN ID.
all - Specifies to delete all subnet VLAN entries.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a subnet VLAN entry:
DGS-3620-28PC:admin#delete subnet_vlan network 172.168.1.1/24
Command: delete subnet_vlan network 172.168.1.1/24