xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1192
subnet_vlan - Specifies that the subnet VLAN classification is precedence than MAC-based
VLAN classification
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure subnet VLAN classification precedence on port 1:
DGS-3620-28PC:admin# config vlan_precedence ports 1 subnet_vlan
Command: config vlan_precedence ports 1 subnet_vlan
Success.
109-5 show vlan_precedence ports
Description
This command is used to display the VLAN classification precedence.
Format
show vlan_pr
ecedence ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies the list of ports used for this display.
Restrictions
None.
Example
To display VLAN classification precedence on ports 1-5:
DGS-3620-28PC:admin#show vlan_precedence ports 1:1-1:5
Command: show vlan_precedence ports 1:1-1:5
Port VLAN Precedence
---- -----------------
1 MAC-Based VLAN
2 Subnet VLAN
3 MAC-Based VLAN
4 MAC-Based VLAN
5 Subnet VLAN
To Next Page
Loading...
Need help?
General