D-Link xStack DGS-3620 Series - Page 1202

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1197
Example
To show super VLAN:
DGS-3620-28PC:admin# show super_vlan
Command: show super_vlan
Function Version: 2.0
Super VLAN : 10
VLAN Name : VLAN10
IPv4 subnet : 10.1.0.0/16
IPv6 Subnet: 2001::1000/16
Oper State : Active
Sub VID : 2-4, 7, 9
Total Entries: 1
DGS-3620-28PC:admin#
110-6 show sub_vlan
Description
This command is used to show sub-VLAN.
Format
show sub_vlan {[<vlan_name 32> | vlanid <vidlist>]}
Parameters
<vlan_name 32> - (Optional) Enter the sub-VLAN name used here. This name can be up to 32
characters long.
vlanid - (Optional) Specifies the sub-VLAN ID used.
<vidlist> - Enter the sub-VLAN ID used here. This value must be between 1 and 4094.
Restrictions
None.
Example
To show all sub-VLAN: