D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1200
111-2 disable surveillance_vlan
Description
This command is used to disable surveillance VLAN globally.
Format
disable surveillance_vlan
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the surveillance VLAN:
DGS-3620-28PC:admin#disable surveillance_vlan
Command: disable surveillance_vlan
Success.
DGS-3620-28PC:admin#
111-3 config surveillance_vlan priority
Description
This command is used to configure the surveillance VLAN priority which is associated with the
surveillance VLAN traffic to distinguish the QoS of the surveillance traffic from the data traffic.
Format
config surveillance_vlan priority <int 0-7>
Parameters
<int 0-7> - Enter the priority of the surveillance VLAN. The range is from 0 to 7. The default
priority is 5.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set the priority of the surveillance VLAN to be 6:

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English