D-Link xStack DGS-3620 Series - Page 1215

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1210
DGS-3620-28PC:admin#
113-2 show system_severity
Description
This command is used to show the severity level control for a system.
Format
show system_severity
Parameters
None.
Restrictions
None.
Example
To show the severity level control for a system:
DGS-3620-28PC:admin#show system_severity
Command: show system_severity
System Severity Trap : warning
System Severity Log : information
DGS-3620-28PC:admin#