D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1225
DGS-3620-28PC:admin# config udp_helper add ipif System 20.0.0.90
Command: config udp_helper add ipif System 20.0.0.90
Success.
DGS-3620-28PC:admin#
117-4 config udp_helper delete ipif
Description
This command is used to delete a UDP Helper server address for specific interface of Switch.
Format
config udp_helper delete ipif <ipif_name 12> <ipaddr>
Parameters
ipif - Specifies the name of the IP interface that receives the UDP broadcast.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
<ipaddr> - Enter the UDP Helper server IP address here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a server address for System interface:
DGS-3620-28PC:admin# config udp_helper delete ipif System 20.0.0.90
Command: config udp_helper delete ipif System 20.0.0.90
Success.
DGS-3620-28PC:admin#
117-5 config udp_helper udp_port add
Description
This command is used to add a UDP port for the UDP Helper function on the Switch.
Format
config udp_helper udp_port add [time | tacacs | dns | tftp | netbios-ns | netbios-ds |
<port_number 0-65535>]

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English