D-Link xStack DGS-3620 Series - Page 1271

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1266
If no parameter is specified, then all the VRRP entries will be displayed.
Restrictions
None.
Example
To display the VRRP configuration:
DGS-3620-28PC:admin# show vrrp
Command: show vrrp
Global VRRP : Disabled
Non-owner response Ping: Disabled
VRRP Trap State : Enabled
Interface Name : System
Authentication Type : No Authentication
VRID : 1
Virtual IP Address : 10.90.90.91
Virtual MAC Address : 00-00-5E-00-01-01
Virtual Router State : Initialize
State : Enabled
Priority : 100
Master IP Address : 10.90.90.90
Critical IP Address : 0.0.0.0
Checking Critical IP : Disabled
Advertisement Interval : 1 secs
Preempt Mode : True
Virtual Router Up Time : 0 centi-secs
Total Entries: 1
DGS-3620-28PC:admin#
120-8 config vrrp trap state
Description
This command is used to enable or disable the VRRP trap state.
Format
config vrrp trap state [enable | disable]
Parameters
enable – Specifies to enable the VRRP trap state.
disable – Specifies to disable the VRRP trap state.