EasyManua.ls Logo

D-Link xStack DGS-3620 Series - Page 1342

D-Link xStack DGS-3620 Series
1371 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1337
5. interfaceName(5)
6. agentCircuitId(6)
7. local(7)
portID: port ID.
deviceClass: LLDP-MED device type.
Event description: Incompatible LLDP-MED TLV set detected
Log Message: Incompatible LLDP-
MED TLV set detected ( on port
< portNum >, chassis id: < chassisType>, <chassisID>, port id: <
portType>, <portID>, device class: <deviceClass>)
Parameters description:
portNum: The port number.
chassisType: chassis ID subtype.
Value list:
1. chassisComponent(1)
2. interfaceAlias(2)
3. portComponent(3)
4. macAddress(4)
5. networkAddress(5)
6. interfaceName(6)
7. local(7)
chassisID: chassis ID.
portType: port ID subtype.
Value list:
1. interfaceAlias(1)
2. portComponent(2)
3. macAddress(3)
4. networkAddress(4)
5. interfaceName(5)
6. agentCircuitId(6)
7. local(7)
portID: port ID.
deviceClass: LLDP-MED device type.
Notice
Voice VLAN Event description: When a new voice device is detected in the
port.
Log Message: New voice device detected (Port <portNum>, MAC
<macaddr>)
Parameters description:
portNum : The port number.
macaddr: Voice device MAC address
Informational
Event description: When a port which is in auto Voice VLAN mode
joins the Voice VLAN
Log Message: Port < portNum > add into Voice VLAN <vid >
Parameters description:
portNum : The port number.
vid:VLAN ID
Informational
Event description: When a port leaves the Voice VLAN and at the
same time, no voice device is detected in the aging interval for that
port, the log message will be sent.
Log Message: Port < portNum > remove from Voice VLAN <vid >
Parameters description:
portNum : The port number.
vid:VLAN ID
Informational
DULD
Event description: A unidirectional link has been detected on this
port
Log Message: [DULD(1):] port:<[unitID:]
portNum> is unidirectional.
Parameters description:
unitID: the unit ID
portNum: port number
Informational
BGP
Event description: BGP FSM with Peer has gone to the
successfully established state.
Log Message: [BGP(1):] BGP connection is successfully
established (Peer:<ipaddr>).
Parameters description:
ipaddr: IP address of BGP peer.
Informational
Event description: BGP connection is normally closed.
Log Message:[BGP(2):] BGP connection is normally
Informational

Table of Contents

Related product manuals