D-Link xStack DGS-3620 Series - Page 1345

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1340
Log Message: OSPF interface <intf-name> changed from area
<area-id> to area <area-id>
Parameters description:
intf-name: Name of OSPF interface.
area-id: OSPF area ID.
Event description: One OSPF neighbor state changed from
Loading to Full.
Log Message: OSPF nbr <nbr-id> on interface <intf-name>
changed state from Loading to Full
Parameters description:
intf-name: Name of OSPF interface.
nbr-id: Neighbor's router ID.
Notice
Event description: One OSPF neighbor state changed from Full to
Down.
Log Message: OSPF nbr <nbr-id> on interface <intf-name>
changed state from Full to Down
Parameters description:
intf-name: Name of OSPF interface.
nbr-id: Neighbor's router ID.
Notice
Event description: One OSPF neighbor state’s dead timer expired.
Log Message: OSPF nbr <nbr-id> on interface <intf-name> dead
timer expired
Parameters description:
intf-name: Name of OSPF interface.
nbr-id: Neighbor's router ID.
Notice
Event description: One OSPF virtual neighbor state changed from
Loading to Full.
Log Message: OSPF nbr <nbr-id> on virtual link changed state
from Loading to Full
Parameters description:
nbr-id: Neighbor's router ID.
Notice
Event description: One OSPF virtual neighbor state changed from
Full to Down.
Log Message: OSPF nbr <nbr-id> on virtual link changed state
from Full to Down
Parameters description:
nbr-id: Neighbor's router ID.
Notice
Event description: OSPF router ID was changed.
Log Message: OSPF router ID changed to <router-id>
Parameters description:
router-id: OSPF router ID.
Informational
Event description: Enable OSPF.
Log Message: OSPF state changed to Enabled
Informational
Event description: Disable OSPF.
Log Message: OSPF state changed to Disabled
Informational
VRRP Debug
Enhancement
Event description: One virtual router state becomes Master.
Log Message: VR <vr-id> at interface <intf-name> switch to
Master
Parameters description:
vr-id: VRRP virtual router ID.
intf-name: Interface name on which virtual router is based.
Informational
Event description: One virtual router state becomes Backup.
Log Message: VR <vr-id> at interface <intf-name> switch to
Backup
Parameters description:
vr-id: VRRP virtual router ID.
intf-name: Interface name on which virtual router is based.
Informational
Event description: One virtual router state becomes Init.
Log Message: VR <vr-id> at interface <intf-name> switch to Init
Parameters description:
vr-id: VRRP virtual router ID.
intf-name: Interface name on which virtual router is based.
Informational
Event description: Authentication type mismatch of one received
VRRP advertisement message.
Log Message: Authentication type mismatch on VR <vr-id> at
interface <intf-name>
Parameters description:
Warning