D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
145
Parameters
id - Specifies the port group ID.
<value 1-64> - Enter the port group ID used here. This value must be between 1 and 64.
name - Specifies the port group name.
<name 16> - Enter the port group name here. This name can be up to 16 characters long.
Restrictions
Only Administrators and Operators can issue this command.
Example
To delete the port group which ID is “2”:
DGS-3620-28PC:admin# delete port_group id 2
Command: delete port_group id 2
Success.
DGS-3620-28PC:admin#
6-11 show port_group
Description
This command is used to display the port group information.
Format
show port_group {id <value 1-64> | name <name 16>}
Parameters
id - (Optional) Specifies the port group ID.
<value 1-64> - Enter the port group ID used here. This value must be between 1 and 64.
name - (Optional) Specifies the port group name.
<name 16> - Enter the port group name here. This name can be up to 16 characters long.
If not specified parameter, will show all the port group.
Restrictions
Only Administrators and Operators can issue this command.
Example
To show all the port group information:

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English