D-Link xStack DGS-3620 Series - Page 173

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
168
Restrictions
Only Administrators, Operators and Power-Users can issue this command. (EI Mode Only
Command)
Example
To disable BGP protocol:
DGS-3620-28PC:admin# disable bgp
Command: disable bgp
Success.
DGS-3620-28PC:admin#
12-3 create bgp
Description
This command is used to create a BGP process. It’s AS number must be set. When BGP protocol
starts, it must belong to a single AS. The user must set the AS number before configuring any of
the other attributes.
Format
create bgp <as_number 1-4294967295>
Parameters
<as_number 1-4294967295> - Specifies the BGP AS number. This value must be between 1
and 4294967295.
Restrictions
Only Administrators, Operators and Power-Users can issue this command. (EI Mode Only
Command)
Example
To create a BGP process:
DGS-3620-28PC:admin# create bgp 100
Command: create bgp 100
Success.
DGS-3620-28PC:admin#