D-Link xStack DGS-3620 Series - Page 209

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
204
Example
This example deletes a matching rule for an AS path access list:
DGS-3620-28PC:admin# delete bgp as_path access_list list_name test
Command: delete bgp as_path access_list list_name test
Success.
DGS-3620-28PC:admin#
12-39 show bgp as_path access_list
Description
This command displays the Autonomous System path’s access list. If a specific access list is not
specified, all AS path access lists will be displayed.
Format
show bgp as_path access_list {<list_name 16>}
Parameters
access_list - Specifies the AS path access list name.
<list_name 16> - (Optional) Enter the AS path access list name here. This name can be up to
16 characters long.
Restrictions
None. (EI Mode Only Command)
Example
This example displays an AS path access list:
DGS-3620-28PC:admin# show bgp as_path access_list 1
Command: show bgp as_path access_list 1
BGP AS Path Access List : 1
deny (_64[6-9][0-9][0-9]_|_65[0-9][0-9][0-9]_)
permit 33
Total Filter Entries: 2
Total AS Path Access List Number: 1
DGS-3620-28PC:admin#
12-40 create bgp community_list
Description
This command is used to create a BGP community list.