xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
214
DGS-3620-28PC:admin# show bgp neighbors 172.16.232.178 routes
Command: show bgp neighbors 172.16.232.178 routes
BGP local router ID is 10.0.40.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? – incomplete
Network Gateway Metric LocPrf Weight Path
*> 10.10.10.0/24 172.16.10.1 0 0 300 10 i
*> 10.10.20.0/24 172.16.10.1 0 0 300 10 i
* 10.20.10.0/24 172.16.10.1 0 0 300 10 i
*dh 30.10.1.1/24 172.3.3.2 100 50 200 20 i
Total Entries :4
12-46 show bgp dampened_routes
Description
This command is used to display dampened entries in the Border Gateway Protocol (BGP) routing
table. If both the IPv4 unicast and IPv6 unicast are not specified, routes for the IPv4 unicast
address family will be displayed.
Format
show bgp dampened_routes {[ipv4 | ipv6] unicast}
Parameters
ipv4 unicast – (Optional) Specifies to display dampened routes for the IPv4 unicast address
family.
ipv6 unicast – (Optional) Specifies to display dampened routes for the IPv6 unicast address
Restrictions
None. (EI Mode Only Command)
Example
To show the BGP dampened routes’ information:
To Next Page
Loading...
Need help?
General