EasyManuals Logo

D-Link xStack DGS-3620 Series User Manual

D-Link xStack DGS-3620 Series
1371 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #284 background imageLoading...
Page #284 background image
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
279
DGS-3620-28PC:admin# config route redistribute dst rip src ospf internal
Command: config route redistribute dst rip src ospf internal
Success.
DGS-3620-28PC:admin#
18-7 delete route redistribute dst rip src
Description
This command is used to delete the route redistribute configuration on the Switch. It specifies to
not redistribute other routing protocols to RIP.
Format
delete route redistribute dst rip src [local | static | ospf | bgp]
Parameters
src - Specifies the source protocol.
static - To not redistribute static routes.
local - To not redistribute local routes.
ospf - To not redistribute OSPF routes.
bgp - To not redistribute BGP routes. (EI Mode Only Parameter)
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete route redistribution settings:
DGS-3620-28PC:admin# delete route redistribute dst rip src static
Command: delete route redistribute dst rip src static
Success.
DGS-3620-28PC:admin#
18-8 create route redistribute dst bgp src
Description
This command is used to redistribute routing information from other routing protocols to BGP.
Format
create route redistribute dst bgp src [local | static | rip | ospf [all | internal | external | type_1
| type_2 | inter+e1 | inter+e2]] {metric <uint 0-4294967295> | route_map <map_name 16>}

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link xStack DGS-3620 Series and is the answer not in the manual?

D-Link xStack DGS-3620 Series Specifications

General IconGeneral
BrandD-Link
ModelxStack DGS-3620 Series
CategorySwitch
LanguageEnglish

Related product manuals