D-Link xStack DGS-3620 Series - Page 327

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
322
20-26 debug ospf show redistribution
Description
This command is used to display the current internal OSPF redistribute list.
Format
debug ospf show redistribution
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example
To display the current OSPF redistribution list:
DGS-3620-28PC:admin# debug ospf show redistribution
Command: debug ospf show redistribution
OSPF Redistribution List:
IP Nexthop State Type Tag
------------------ --------------- ----- ---- ---------------
1.1.1.0/24 0.0.0.0 ON 2 0.0.0.0
OSPF ASE Table:
IP Nexthop State Type Tag
------------------ --------------- ----- ---- ---------------
1.1.1.0/24 0.0.0.0 ON 2 0.0.0.0
DGS-3620-28PC:admin#
20-27 debug ospf show request_list
Description
This command is used to display the current internal OSPF request list.
Format
debug ospf show request_list
Parameters
None.