D-Link xStack DGS-3620 Series - Page 348

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
343
DGS-3620-28PC:admin# debug bgp show bgp_timer
Command: debug bgp show bgp_timer
BGP timer Link:
Node Time Func
---- ---- ------
08B108D0 0001 00675AF4
08B1AC70 0016 0065F4F4
08B1ACA8 0017 0065F5CC
08B37DCC 0029 0065F4F4
08B37E04 0030 0065F5CC
032821BC 0035 00662840
08B1AC54 0135 0065F40C
08B37DB0 0148 0065F40C
DGS-3620-28PC:admin#
20-51 debug bgp show community_list
Description
This command is used for displaying current community list configuration in protocol stack.
Format
debug bgp show community_list
Parameters
None.
Restrictions
Only Administrator-level users can issue this command. (EI Mode Only Command)
Example
Configure BGP to show current community list information:
DGS-3620-28PC:admin# debug bgp show community_list
Command: debug bgp show community_list
Community list:1 standard
permit 50000:100
DGS-3620-28PC:admin#
20-52 debug bgp show redist_info
Description
This command is used for displaying current BGP redistribution information.