D-Link xStack DGS-3620 Series - Page 359

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
354
Example
To disabled the DHCPv6 server debug function:
DGS-3620-28PC:admin# debug dhcpv6_server state disable
Command: debug dhcpv6_server state disable
Success.
DGS-3620-28PC:admin#
20-68 debug dhcpv6_server state enable
Description
This command is used to enable the DHCPv6 server debug functions.
Format
debug dhcpv6_server state enable
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enabled the DHCPv6 server debug function:
DGS-3620-28PC:admin# debug dhcpv6_server state enable
Command: debug dhcpv6_server state enable
Success.
DGS-3620-28PC:admin#
20-69 debug pim ssm
Description
This command is used to enable the PIM-SSM debug function.
Format
debug pim ssm