D-Link xStack DGS-3620 Series - Page 36

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
31
Example
To disable the out-of-band management state:
DGS-3620-28PC:admin#config out_band_ipif state disable
Command: config out_band_ipif state disable
Success.
DGS-3620-28PC:admin#
2-30 show out_band_ipif
Description
This command is used to display the current configurations of special out-of-band management
interfaces.
Format
show out_band_ipif
Parameters
None.
Restrictions
None.
Example
To display the configuration of out-of-band management interfaces:
DGS-3620-28PC:admin#show out_band_ipif
Command: show out_band_ipif
Status : Enable
IP Address : 192.168.0.1
Subnet Mask : 255.255.255.0
Gateway : 0.0.0.0
Link Status : LinkDown
DGS-3620-28PC:admin#