D-Link xStack DGS-3620 Series - Page 372

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
367
DGS-3620-28PC:admin# debug show cpu utilization
Command: debug show cpu utilization
Five seconds - 14 % One minute - 14 % Five minutes - 14 %
Process Name 5Sec 1Min 5Min
----------------- ------ ------ ------
OS_UTIL 84 % 86 % 86 %
bcmL2X.0 8 % 7 % 7 %
bcmCNTR.0 2 % 2 % 2 %
MAUMIB_TASK 1 % 1 % 1 %
GBIC_Pooling 1 % 0 % 0 %
FAN_Pooling 1 % 0 % 0 %
DGS-3620-28PC:admin#
20-83 debug ntp level
Description
This command is used to to set NTP debug function.
Format
debug ntp level <value 0-255>
Parameters
<value 0-255> - 0 will disable debug message and increasing this value will get more detailed
debug message.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
DGS-3620-28PC:admin#debug ntp level 1
Command: debug ntp level 1
Success.
DGS-3620-28PC:admin#