D-Link xStack DGS-3620 Series - Page 398

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
393
Parameters
<pool_name 12> - Enter the name of the DHCP pool.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a DHCP pool:
DGS-3620-28PC:admin#create dhcp pool nyknicks
Command: create dhcp pool nyknicks
Success.
DGS-3620-28PC:admin#
23-5 delete dhcp pool
Description
This command is used to delete a DHCP pool.
Format
delete dhcp pool [<pool_name 12> | all]
Parameters
<pool_name 12> - Enter the name of the DHCP pool.
all - Specifies to delete all the DHCP pools.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a DHCP pool:
DGS-3620-28PC:admin#delete dhcp pool nyknicks
Command: delete dhcp pool nyknicks
Success.
DGS-3620-28PC:admin#