D-Link xStack DGS-3620 Series - Page 416

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
411
23-31 show dhcp option_profile
Description
This command is used to display the current DHCP option profile configuration.
Format
show dhcp option_profile {<profile_name 12>}
Parameters
<profile_name 12> - (Optional) Enter the DHCP server option profile name here. This name can
be up to 12 characters long.
If no parameter is specified, the system will display all DHCP option profile configurations.
Restrictions
None.
Example
To display the current DHCP option profile configuration.
DGS-3620-28PC:admin#show dhcp option_profile
Command: show dhcp option_profile
DHCP Option Profile Name : profile1
Option Type Value
------ ------ ------------------------------------------------------------
69 hex c0a800fe
72 string 192.168.0.254
Total Entries: 1
DGS-3620-28PC:admin#
23-32 config dhcp pool option_profile
Description
This command is used to apply an option profile to a specific DHCP pool.
Format
config dhcp pool option_profile <pool_name 12> [add | delete] <profile_name 12>
Parameters
<pool_name 12> - Enter the DHCP pool name here. This name can be up to 12 characters long.
add - Specifies to add an option profile to a DHCP pool, configured on this switch.