D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
415
Format
config filter dhcp_server log [enable | disable]
Parameters
enable – Specifies to enable the log for a DHCP server filter event.
disable – Specifies to disable the log for a DHCP server filter event.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the log for a DHCP server filter event:
DGS-3620-28PC:admin#config filter dhcp_server log enable
Command: config filter dhcp_server log enable
Success.
DGS-3620-28PC:admin#
24-3 config filter dhcp_server trap
Description
This command is used to enable or disable the trap for a DHCP server filter event.
Format
config filter dhcp_server trap [enable | disable]
Parameters
enable – Specifies to enable the trap for a DHCP server filter event.
disable – Specifies to disable the trap for a DHCP server filter event.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the trap for a DHCP server filter event:
DGS-3620-28PC:admin#config filter dhcp_server trap enable
Command: config filter dhcp_server trap enable
Success.
DGS-3620-28PC:admin#

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English