D-Link xStack DGS-3620 Series - Page 444

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
439
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a DHCPv6 prefix pool prefixpool1 for interface System:
DGS-3620-28PC:admin#config dhcpv6 pool prefix_delegation prefixpool1 1111::/48
64 System
Command: config dhcpv6 pool prefix_delegation prefixpool1 1111::/48 64 System
Success.
DGS-3620-28PC:admin#
26-10 show dhcpv6 manual_binding
Description
This command will display the manual binding entries for the selected or all DHCPv6 pools.
Format
show dhcpv6 manual_binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Enter the DHCPv6 pool name used here. This name can be up to
12 characters long.
If no parameter is specified, then all the entries will be displayed.
Restrictions
None.
Example
To display the manual binding entries of the DHCPv6 pool: