D-Link xStack DGS-3620 Series - Page 469

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
464
DGS-3620-28PC:admin#enable dnsr cache
Command: enable dnsr cache
Success.
DGS-3620-28PC:admin#
To enable static table lookup for DNS relay:
DGS-3620-28PC:admin#enable dnsr static
Command: enable dnsr static
Success.
DGS-3620-28PC:admin#
30-3 disable dnsr
Description
This command is used to disable DNS relay on the switch.
Format
disable dnsr {[cache | static]}
Parameters
cache - (Optional) Specifies to disable the cache lookup for the DNS relay on the switch.
static - (Optional) Specifies to disable the static table lookup for the DNS relay on the switch.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the status of DNS relay:
DGS-3620-28PC:admin#disable dnsr
Command: disable dnsr
Success.
DGS-3620-28PC:admin#
To disable cache lookup for DNS relay:
DGS-3620-28PC:admin#disable dnsr cache
Command: disable dnsr cache
Success.