D-Link xStack DGS-3620 Series - Page 480

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
475
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure land attack and blat attack prevention, the action is drop:
DGS-3620-28PC:admin#config dos_prevention dos_type land_attack blat_attack
action drop state enable
Command: config dos_prevention dos_type land_attack blat_attack action drop
state enable
Success.
DGS-3620-28PC:admin#
32-2 config dos_prevention log
Description
This command is used to enable or disable the DoS prevention log state.
Format
config dos_prevention log [enable | disable]
Parameters
enable - Specifies to enable the DoS prevention log state.
disable - Specifies to disable the DoS prevention log state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the DoS prevention log:
DGS-3620-28PC:admin#config dos_prevention log enable
Command: config dos_prevention log enable
Success.
DGS-3620-28PC:admin#
32-3 config dos_prevention trap
Description
This command is used to enable or disable the DoS prevention trap state.