D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
481
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable ERPS:
DGS-3620-28PC:admin#enable erps
Command: enable erps
Success.
DGS-3620-28PC:admin#
34-2 disable erps
Description
This command is used to disable the ERPS function on the switch.
Format
disable erps
Parameters
None. The ERPS is disabled by default.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable ERPS:
DGS-3620-28PC:admin#disable erps
Command: disable erps
Success.
DGS-3620-28PC:admin#
34-3 create erps raps_vlan
Description
This command is used to create an R-APS VLAN on the switch. There should be only one R-APS
VLAN used to transfer R-APS messages. Note that the R-APS VLAN must already have been
created by the create vlan command.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English