D-Link xStack DGS-3620 Series - Page 500

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
495
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create multicast MAC forwarding:
DGS-3620-28PC:admin# create multicast_fdb default 01-00-00-00-01-01
Command: create multicast_fdb default 01-00-00-00-01-01
Success.
DGS-3620-28PC:admin#
37-4 config multicast_fdb
Description
This command is used to configure the multicast MAC address forwarding table.
Format
config multicast_fdb <vlan_name 32> <macaddr> [add | delete] <portlist>
Parameters
<vlan_name 32> - Enter the name of the VLAN on which the MAC address resides. The
maximum name length is 32 characters.
<macaddr> - Enter the MAC address that will be added or deleted to the forwarding table.
add - Specifies to add ports.
delete - Specifies to delete ports.
<portlist> - Specifies a range of ports to be configured.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add multicast MAC forwarding:
DGS-3620-28PC:admin# config multicast_fdb default 01-00-00-00-01-01 add 1-5
Command: config multicast_fdb default 01-00-00-00-01-01 add 1-5
Success.
DGS-3620-28PC:admin#